Have you noticed spots on your dishes, short-lived appliances, or skin that feels different after showering and want a straightforward way to fix it?
Whole House Water Filtration System Supplier Maitland FL
If you live in Maitland, FL and want to improve the water quality throughout your home, you’ll find clear benefits in a whole house filtration and conditioning system. This article helps you understand why a system like the HydroTAC from UnTapped Technologies may be the right fit, how it works, how it compares to traditional softeners, and what to expect for installation and maintenance.
Why a whole house system matters for your home
A whole house water filtration system treats the water at the point it enters your home so every faucet and appliance receives improved water. That means cleaner drinking water, reduced scale buildup in pipes and water heaters, and protection for dishwashers, washing machines, and plumbing fixtures. You’ll enjoy consistent water quality and reduced maintenance needs across your household.
Why consider a supplier near Maitland, FL
Buying from a supplier that understands Florida water conditions helps you choose the right technology and get timely support. A local supplier can advise you on municipal water characteristics, recommend proper installation locations, and help you match a system’s flow rate to your household demands.
About UnTapped Technologies
UnTapped Technologies is the supplier offering the HydroTAC Whole-Home System — a water filter and conditioner designed for residential whole-house use. You can contact them directly if you want to buy, ask questions, or arrange support.
- Company: UnTapped Technologies
- Product: HydroTAC Whole-Home System – Water Filter & Conditioner
- Call Now: 1-561-249-8361
- Buy Online: https://untappedtech.com/product/hydrotac-water-filter-conditioner/
- Address: 1025 Gateway Boulevard STE 303-249, Boynton Beach, Florida 33426, United States
- Hours: Monday–Friday 9am–5pm; Saturday–Sunday Closed
You can call UnTapped to confirm compatibility, ask about installation partners in the Maitland area, or set up a replacement filter subscription.
Product Spotlight: HydroTAC Whole-Home System — Water Filter & Conditioner
This system is often called a salt-free water softener alternative because it conditions water without removing beneficial minerals. It uses patented Template Assisted Crystallization (TAC)® technology plus an activated carbon block to address scale and improve water quality at every faucet.
A few sentences about the product:
- The HydroTAC treats water with a dual-cartridge arrangement: a 20-micron coconut activated carbon block and a TAC scale prevention cartridge.
- It prevents scale formation, reduces odors and tastes, and preserves essential minerals such as calcium and magnesium rather than exchanging them for sodium.
Key product features
You’ll find the HydroTAC attractive for its low maintenance, compact size, and eco-friendly operation.
- Extremely efficient scale prevention.
- 5 seconds contact time regardless of hardness level (conventional ion exchange resins require around 90 seconds).
- No salt or chemical regenerants required.
- No backwash waste and no discharge of regenerant brine.
- Works where salt-based softeners may be banned.
- Protects the environment and reduces water use.
- Long lasting media that is not consumed by reactions.
- No control valve or electricity required; media operates in upflow condition.
HydroTAC benefits at a glance (table)
| Feature | What it means for you |
|---|---|
| Salt-free TAC technology | Keeps beneficial minerals in water and avoids added sodium |
| Carbon block pre-filter | Reduces chlorine taste, odors, and many organic contaminants |
| No electricity or backwash | Low operating costs and easy installation in tight spaces |
| Compact size | Fits in small utility areas, closets, or near water heaters |
| Low maintenance | Filter replacement on predictable schedule; subscription available |
| Protects tankless heaters | Helps prevent scale buildup and improves energy performance |
How the HydroTAC works
Understanding the process helps you know what to expect and why it’s effective.
Dual-stage filtration and conditioning
First stage: carbon block filter
- Incoming water passes through a 20-micron activated carbon block. This reduces chemicals, chlorine, and tastes/odors that affect drinking water and the taste of coffee, tea, and cooking.
Second stage: TAC cartridge
- Water then moves through the inner TAC cartridge. TAC stands for Template-Assisted Crystallization. The media causes scale-forming hardness minerals (calcium and magnesium ions) to form microscopic inert crystals. These crystals remain suspended in the water and do not adhere to pipes or appliances, thus preventing scale buildup.
You’ll notice the practical outcome: reduced scale on heating elements, less frequent descaling of showerheads and faucets, and extended appliance lifecycle.
Why TAC differs from a traditional softener
A traditional ion-exchange water softener removes calcium and magnesium and replaces them with sodium. TAC does not remove minerals. Instead, it alters their physical form so they can’t form scale.
Comparison table: TAC conditioner vs. ion-exchange softener
| Aspect | TAC Conditioner (HydroTAC) | Ion-Exchange Softener |
|---|---|---|
| Mineral removal | No — minerals retained | Yes — calcium/magnesium replaced with sodium |
| Water taste/feel | No slippery feel; minerals retained | Slippery feeling sometimes noticed |
| Water waste needed for regeneration | None | Yes — periodic brine discharge and water waste |
| Maintenance frequency | Low — cartridge replacements | Higher — salt replenishment and system regeneration |
| Electrical requirement | No | Often yes (control valve) |
| Environmental impact | Lower — no brine discharge | Higher — brine discharge can be problematic |
| Effectiveness at preventing scale | Very effective (up to 99.6% prevention in studies) | Effective by removal of hardness ions |
Performance and health considerations
You’ll care about how the system affects your family’s health, appliances, and water-using habits.
Health and mineral retention
One of the advantages of the HydroTAC is that it preserves natural, essential minerals like calcium and magnesium. These minerals remain in your drinking water, which can be preferable for taste and nutrition compared to softened water that has sodium levels increased.
If you’re on a medically restricted sodium diet, TAC conditioning is particularly useful because it avoids adding sodium to your water, unlike softening systems.
Protection for appliances and plumbing
By preventing scale formation, the HydroTAC reduces the insulating layer of mineral deposits that form on heating elements and inside pipes. This leads to:
- Increased lifespan for water heaters, dishwashers, and laundry machines.
- Reduced energy usage in heating systems since elements remain clean and efficient.
- Less frequent repairs and lower maintenance costs.
Environmental and utility benefits
Because the HydroTAC uses no salt or backwash discharge, you avoid wasting water during regeneration cycles. Over time you’ll likely see:
- Lower overall water usage (no backwash cycles or regeneration).
- Reduced environmental impact from brine-free operation.
- Potential energy savings from more efficient water heaters.
Sizing and installation for homes in Maitland, FL
Choosing the right size and installing correctly ensures you get consistent water flow and protection.
Flow rate and household sizing
HydroTAC systems are rated for a certain flow capacity (HydroTAC typically supports 10 gallons per minute in many residential setups). You’ll want a unit that handles the peak simultaneous water demand in your home:
- Single-family homes and most townhomes: the standard HydroTAC is usually sufficient.
- Larger homes or those with multiple simultaneous high-flow fixtures: verify total GPM and consult UnTapped for multi-unit solutions or parallel installations.
A practical tip: measure peak flow by noting how many fixtures may run at once — showers, washing machine, dishwasher, or faucets — and compare that to fixture flow rates.
Location and space requirements
The HydroTAC system is compact — approximately 9 inches wide by 18 inches tall — and requires only overhead clearance for changing filters. You can mount it near the main water line, in a utility closet, garage, or near a water heater. Flex hoses can help you fit the unit into tighter spaces.
Installation basics
- Install on the main cold-water line after the pressure regulator and before any branch lines so all water is conditioned.
- Provide shut-off valves to isolate the system for maintenance.
- Install a bypass valve so you can run water while servicing the HydroTAC without shutting off supply to the house.
- If you have a tankless water heater, placing the HydroTAC upstream will help prevent scale buildup and often improves heater efficiency.
You can have a licensed plumber perform installation or work with UnTapped’s recommended installers for best results in Maitland.
Will it work with well water?
HydroTAC is best suited for municipally treated water because municipal sources adhere to EPA-recommended contaminant levels. If you have well water, you should get your water tested first. Certain contaminants (like large amounts of iron, manganese, or copper) might foul the TAC media or carbon block prematurely. If your test shows such contaminants, UnTapped can recommend pre-treatment options.
Maintenance and filter replacement
Keeping the HydroTAC maintained is straightforward and predictable.
Replacement schedules
- Coconut Carbon Block: up to 1 year or 50,000 gallons, depending on water quality and usage.
- TAC Scale Prevention Cartridge: up to 3 years or 250,000 gallons.
You’ll want to monitor your water quality and follow these intervals. UnTapped offers a subscription option so you can receive replacement cartridges on schedule and avoid lapses in protection.
How you’ll know it’s time to replace
You may notice:
- Slight changes in taste or odor as the carbon block approaches its end of life.
- A long-term reduction in scale protection (rare to notice immediately because effect is gradual).
- If your home’s water usage increases dramatically or if your water quality changes, consider replacing sooner.
The subscription option takes the guesswork out of timing.
Simple replacement steps
- Shut off the inlet water using the system’s shutoff valves and relieve system pressure.
- Remove the canister or cartridges per the manufacturer’s instructions.
- Replace the carbon block annually and the TAC cartridge every three years.
- Reassemble and slowly restore water pressure, checking for leaks.
If you prefer, a local plumber can do the annual swap and check the system for you.
Frequently Asked Questions (FAQ’s)
You’ll find answers to common questions here; these are adapted from UnTapped’s information with additional context.
What is the difference between a softener and the TAC water conditioner?
With a TAC conditioner, minerals are not removed or replaced. A softener removes calcium and magnesium and replaces them with sodium via ion exchange. That exchange gives softened water a slippery feel and requires periodic regeneration that wastes water. TAC reorganizes minerals into microscopic crystals that flow harmlessly through your plumbing, preventing scale without chemicals, regeneration, or a slippery feeling.
Why should I choose the HydroTAC over a water softener?
HydroTAC is compact, virtually maintenance-free, does not require salt or electricity, and is suitable for homes, townhomes, and condos where space is limited. It’s an excellent fit for you if you want scale control without the environmental and operational burdens of salt-based softeners. It’s commonly installed with tankless water heaters for space savings and compatibility.
How does the HydroTAC work?
Water first passes through the 20-micron carbon block to reduce impurities and taste/odor issues. Then it flows through the TAC cartridge where scale-causing minerals form microscopic inert crystals that remain suspended and do not attach to surfaces. This dual design combines filtration and scale prevention in one unit.
Will it affect my tankless water heater’s performance?
The HydroTAC prevents scale formation upstream of your tankless heater, which can lower flue gas temperature in gas systems by 30% or more and produce significant energy savings in electric systems. You’ll typically see better heater efficiency and fewer service calls related to scale.
Will this work for my well?
The HydroTAC is most suitable for municipally treated water. If you have a well, you should obtain a water analysis. Municipal consumer confidence reports can help if you use city water. For wells, address contaminants like iron, manganese, or copper that may foul the media, possibly with pre-treatment.
How would I know when to replace the filters?
The carbon block lasts up to 1 year or 50,000 gallons and the TAC cartridge up to 3 years or 250,000 gallons. You can sign up for UnTapped’s subscription option to receive replacements on a schedule.
How big is the system?
The system is about 9 inches wide by 18 inches tall. You’ll only need that much floor width plus overhead space to replace filters. Flexible hoses allow you to place the system in tight spaces while maintaining access.
How soon after installation can I drink the water?
The HydroTAC provides treated water immediately from every faucet, so you can drink it right away. If you have concerns about specific contaminants that require more advanced filtration (e.g., certain heavy metals or microbial concerns), consider additional point-of-use filtration after testing.
What is TAC?
TAC stands for Template-Assisted Crystallization, a technology that transforms hardness minerals into harmless microscopic crystals that won’t adhere to surfaces. TAC does not add or remove elements from your water and lets essential minerals remain. HydroTAC has been shown to prevent up to 99.6% of scale in various studies.
Cost and value over time
You’ll want to weigh upfront cost against long-term savings.
Upfront vs long-term costs
- Upfront: the system cost (purchase price and installation if you hire a plumber).
- Ongoing: replacement cartridges (carbon annually, TAC every 3 years), potential professional maintenance if you choose it.
- Savings: reduced energy bills for water heating, fewer appliance repairs and replacements, and lower water usage (no regeneration cycles).
- Environmental benefits: no brine discharge and less water waste.
Over several years, many homeowners find that protection for expensive appliances and reduced maintenance justify the initial investment.
Installation checklist for you
Use this checklist when planning installation so you have everything ready:
- Determine peak household GPM to confirm HydroTAC capacity.
- Select installation location near main cold-water entry or near water heater.
- Ensure space for a 9×18 inch system with overhead clearance.
- Provide shut-off and bypass valves for serviceability.
- Obtain necessary permits if required by local code or property rules.
- Plan carbon block replacement each year and TAC cartridge replacement every three years; consider subscription.
- If on well water, get a water analysis prior to purchase.
Warranty, support, and purchasing options
UnTapped typically provides product support and subscription options to make ownership easier.
- Buy online: use the UnTapped product page for HydroTAC.
- Call for details: 1-561-249-8361 to ask specific questions or secure a local installer recommendation.
- Subscription: sign up to receive filters automatically so you won’t forget replacement times.
- Support hours: Monday–Friday, 9am–5pm; weekends closed.
- Address: UnTapped Technologies, Boynton Beach, FL (see contact details above).
Ask about warranty terms, return policy, and any installation or labor guarantees offered by local installers.
Why choose UnTapped Technologies for your Maitland home
You’ll get a dedicated supplier focused on whole-home solutions rather than piecemeal products. Benefits include:
- A combined filtration and scale prevention approach that simplifies your system footprint.
- A product designed for residential whole house applications and compatibility with tankless water heaters.
- A subscription program to keep your system performing reliably.
- Support from a company that sells the HydroTAC directly and can guide you through pre-purchase questions.
If you prefer working with a local company that understands Florida water conditions and can connect you with installers, UnTapped is positioned to assist.
Practical scenarios: when HydroTAC is a great fit
You’ll find the HydroTAC especially useful if any of the following apply:
- You want to protect a tankless water heater from scale formation.
- You live in a home with limited space for a traditional salt softener.
- You prefer to keep beneficial minerals in your water for taste and health.
- You want to avoid the environmental issues associated with brine discharge.
- You prefer a low-maintenance option with predictable cartridge lifespans and subscription replacements.
Next steps for getting started in Maitland, FL
Here’s how you can move forward with confidence:
- Get a basic water test if you aren’t sure about contaminants (especially for well water).
- Calculate your household’s peak flow requirements and verify HydroTAC’s 10 GPM rating matches your needs.
- Call UnTapped at 1-561-249-8361 to ask about installation partners or to purchase online at the product page.
- Consider the subscription option for automatic filter replacements.
- Schedule professional installation if you prefer not to DIY — ask for recommended local plumbers familiar with HydroTAC installations.
Final thoughts
Choosing a whole house water filtration and conditioning system like the HydroTAC gives you scale protection without sacrificing beneficial minerals in your drinking water. It’s compact, eco-friendly, and designed for low maintenance, making it a practical choice for many homes in and around Maitland, FL. If you want to protect appliances, improve water taste, and avoid salt-based softeners, start by testing your water and contacting UnTapped Technologies for purchase and installation guidance.
Call UnTapped Technologies at 1-561-249-8361 or buy online at: https://untappedtech.com/product/hydrotac-water-filter-conditioner/ to get personalized help and begin improving your home’s water quality today.
