HydroTAC 20 Micron Radial Flow Carbon Cartridge

$90.00

HydroTAC’s® 20-micron radial flow carbon filters have exceptional chlorine, taste, and odor reduction power without compromising high flow capacity. Through adsorption, harmful contaminants, adhere to the surface of activated carbon, efficiently reducing these impurities from your water before it flows out of your faucets. Manufactured using a unique process that reduces harmful greenhouse gas emissions, these filters are made from high quality coconut shell activated carbon; known to be more porous and the most renewable of carbon-based filters. Designed to allow maximum contact between water and carbon ensuring optimal reduction capabilities with reduced press drop.

Category:

Description

High Quality Coconut Shell Carbon

Harnessing carbon block technology, our 20-micron radial flow carbon filter removes impurities and contaminants from your water without hindering your water flow rate. Coconut shell carbon is one of the most renewable resources used in filters, making this an environmentally sound choice for your home’s water filtration process. Coconut shell activated carbon improves taste, smell, and purification with its abundance of micro-pores capable of removing a wide range of pollutants from your water. Activated carbon treatment is the most studied treatment for PFAS removal and has been proven to significantly reduce PFAS chemicals. Our activated carbon block has an exceptional amount of surface area that will bind to and reduce many contaminants so that you can rest easy.

More about HydroTAC®

INCLUDES:  x1 20 Micron Radial Flow Carbon Cartridge (Lifespan : 1 year or 50,000 gallons)

SPECIFICATIONS

Rated Flow Maximum 10 gpm (37.8 lpm)
Working Temp 40 – 104 °F (5 – 40 °C)
Working Pressure 10 – 90 psi – a pressure limiting valve must be installed when pressure exceeds 70 psi.
Working Conditions For indoor use – protection required when installed outdoors.
Size 5.5 in x 5.5 in x 13.25 in (140 mm x 140 mm x 337 mm)
Min Net Weight 5.7 lbs (2.59 kg)
Contaminants Reduced Scale, Sediment, Other Chemicals, Chlorine Taste and Odor

CONDITIONS FOR USE

pH 6.5 to 8.5
Max Hardness 75 grains per gallon
Chlorine < 3 ppm
Iron, Ferrous ≤ 0.3 mg/L
Manganese ≤ 0.05 mg/L
Copper ≤ 1.3 mg/L
Oil & Phosphates zero*
Hydrogen Sulfide zero*

Influent water must not exceed these levels.

*Must be removed prior to HydroTAC®.

NOTICE: New copper should be used for a minimum of one month before placing the unit into service.

NOTICE: Untreated private well water may contain contaminants with levels outside of the operating guidelines. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

LEAD FREE*: The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.

Additional information

Weight 6 lbs
Dimensions 6 × 6 × 15 in

There are no reviews yet.

Be the first to review “HydroTAC 20 Micron Radial Flow Carbon Cartridge”

Related products