Description
Revolutionary TAC Technology
HydroTAC® uses Template Assisted Crystallization® (TAC®) technology, which converts “hard” minerals into inactive “soft” scale particles via patented TAC® technology. The media is made of a specially treated polymer that has microscopic nucleation sites where these minerals are forced to crystallize on each other rather than downstream surfaces. Once the minerals depart from the polymer, they remain in a microscopic, harmless crystallized form and flow through and down your drain.
INCLUDES: x1 HydroTAC® Scale Prevention Filter Cartridge (Lifespan : 3 years or 250,000 gallons)
SPECIFICATIONS
| Rated Flow | Maximum 10 gpm (37.8 lpm) |
| Working Temp | 40 – 104 °F (5 – 40 °C) |
| Working Pressure | 10 – 90 psi – a pressure limiting valve must be installed when pressure exceeds 70 psi. |
| Working Conditions | For indoor use – protection required when installed outdoors. |
| Size | 2.63 in x 2.63 in x 13.75 in (66.8 mm x 66.8 mm x 350 mm) |
| Min Net Weight | 1.7 lbs (0.8 kg) |
| Contaminants Reduced | Scale, Sediment, Other Chemicals, Chlorine Taste and Odor |
CONDITIONS FOR USE
| pH | 6.5 to 8.5 |
| Max Hardness | 75 grains per gallon |
| Chlorine | < 3 ppm |
| Iron, Ferrous | ≤ 0.3 mg/L |
| Manganese | ≤ 0.05 mg/L |
| Copper | ≤ 1.3 mg/L |
| Oil & Phosphates | Zero* |
| Hydrogen Sulfide | Zero* |
Influent water must not exceed these levels.
*Must be removed prior to HydroTAC®.
NOTICE: New copper should be used for a minimum of one month before placing the unit into service.
NOTICE: Untreated private well water may contain contaminants with levels outside of the operating guidelines. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
LEAD FREE*: The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.
There are no reviews yet.