TAC Cartridge and Carbon Cartridge

HydroTAC Combo Pack Replacement Cartridges

$250.00

The Patented TAC® Scale Prevention Cartridge causes the scale forming crystals to stick to each other and not to metal surfaces producing the first effective salt or chemical-free scale prevention method. HydroTAC® is proven to remove and prevent up to 99.6% of scale through multiple independent studies. The 20 Micron Radial Flow Carbon Filter improves taste, smell, and purification with a design that allows maximum contact between the water and carbon ensuring optimal reduction capabilities with reduced pressure drop. A combination that cannot be beat by other alternative water treatment systems.

Out of stock

Category:

Description

Our dual filter system design expands your filtration benefits...

Carbon Block Technology Benefits

  • Green source of carbon made from renewable resources
  • High porosity & tight structure
  • Enhances the flavor of drinking water
  • Enhances the visual appeal of water
  • Reduces or removes various halogens, pharmaceuticals, pesticides, & rust
  • Reduces or removes unappealing odor, taste, & smell
More about HydroTAC
A Template Assisted Crystalline structure photograph taken with a Scanning Electron Microscope.

TAC® Technology Benefits

  • Leaves in beneficial minerals
  • No need for salt or corrosive chemicals
  • Removes existing scale deposits
  • Longer life expectancy for appliances
  • Lasts up to 3 years without having to replace
  • “Greener” filtration without wasting any water
More About TAC Science

INCLUDES:

x1 HydroTAC® 20 Micron Radial Flow Carbon Cartridge (Lifespan : 6months to 1 year or 50,000 gallons)

x1 HydroTAC® Scale Prevention Filter Cartridge (Lifespan : 3 years or 250,000 gallons)

SPECIFICATIONS

Rated Flow Maximum 10 gpm (37.8 lpm)
Working Temp 40 – 104 °F (5 – 40 °C)
Working Pressure 10 – 90 psi – a pressure limiting valve must be installed when pressure exceeds 70 psi.
Working Conditions For indoor use – protection required when installed outdoors.
Size 5.5 in x 5.5 in x 13.25 in (140 mm x 140 mm x 337 mm)
Min Net Weight 7.7 lbs (3.5 kg)
Contaminants Reduced Scale, Sediment, Other Chemicals, Chlorine Taste and Odor

CONDITIONS FOR USE

pH 6.5 to 8.5
Max Hardness 75 grains per gallon
Chlorine < 3 ppm
Iron, Ferrous ≤ 0.3 mg/L
Manganese ≤ 0.05 mg/L
Copper ≤ 1.3 mg/L
Oil & Phosphates Zero*
Hydrogen Sulfide Zero*

Influent water must not exceed these levels.

*Must be removed prior to HydroTAC®.

NOTICE: New copper should be used for a minimum of one month before placing the unit into service.

NOTICE: Untreated private well water may contain contaminants with levels outside of the operating guidelines. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

LEAD FREE*: The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.

Additional information

Weight 8 lbs
Dimensions 6 × 6 × 15 in

There are no reviews yet.

Be the first to review “HydroTAC Combo Pack Replacement Cartridges”

Related products